All-on-X Dental Implants
All-on-X: Full-Arch Implant Concepts, Compared and Built
All on X is shorthand for a family of full-arch concepts: an arch of teeth carried by a defined set of implants, four, six, or another count your plan justifies. This page sorts the options from the lab side, so the configuration you prescribe and the prosthesis we fabricate meet in the middle, from our California, Colorado, and Texas labs.
What All-on-X Means, and What It Leaves Open
The X is the honest part of the name: how many fixtures carry the arch is a planning decision, not a package. Four implants keep surgery and components lean where bone quality cooperates; six distribute load and add redundancy; the prosthetic side of an all-on-x plan ranges from screw-retained monolithic arches to titanium-bar constructions and removable overdenture variants. Patients arrive asking for the concept by the fixture count they have heard, referral notes shorthand the same situation, and the four-fixture design is simply the best-known member of the family. We fabricate every restorative expression of the all on x idea in-house, and this page exists so you can route your case to the right product page the first time.
Fixture count is a surgical decision; what patients live with, clean, and pay to maintain is the prosthesis. We argue for planning full-arch cases backwards, from the teeth to the implants: restorative space, lip support, hygiene access, and maintenance strategy first, configuration second. Send the diagnostic records and the intended concept, and our implant department contributes the lab-side numbers your all on x planning needs before the first fixture is scheduled.
Materials & Options
- Retention
- Cement-retained & screw-retained
- Custom Abutments
- CAD/CAM titanium & zirconia
- Full-Arch Materials
- Monolithic zirconia, PMMA, Ti bar + acrylic
- Implant Systems
- Straumann, Nobel, Zimmer, Implant Direct, BioHorizons, Osstem & more
- Turnaround
- 14 working days per stage
- Rush Available
- Rush turnaround on request
- Digital Files
- STL, OBJ accepted
- Delivery
- Nationwide UPS/FedEx
How We Fabricate Your All-on-X Dental Implants Case
- 1
Send Your Case
Physical impressions or a digital STL/OBJ scan via our portal
- 2
Design & Verify
CAD design, material selection and approval before fabrication
- 3
Fabricate & Finish
CAD/CAM milling or layering, finishing and documented QC
- 4
Deliver
Nationwide UPS/FedEx or scheduled local pickup
Contact Us
Frequently Asked Questions
Start Sending Cases Today
New accounts: we respond within 24 hours. Pickup & nationwide delivery available.
Open a Lab AccountWhat does an All-on-X restoration cost from the lab?
We quote per case and stage to accounts rather than publishing figures, because fixture count, bar involvement, and material tier change the arithmetic per arch. Open a lab account and you receive the implant fee schedule; send a concrete treatment plan and you get a case-level quote to build the patient conversation on.
All-on-X fixed or an overdenture: how do I frame the choice?
Fixed arches maximize stability and the feeling of natural teeth; removable overdentures win on hygiene access, serviceability, and budget. Dexterity, tissue situation, and maintenance discipline usually decide. Patients bring several names for either variant; the distinction that matters is fixed versus removable, not the label. Both come from the same implant department here, so the recommendation you give the patient never depends on what the lab happens to sell.
Four or six implants per arch: does the lab have a preference?
None. Whether the plan calls for four fixtures or six, the count is your surgical planning decision, made with the bone in front of you. What the lab cares about is the consequence: spacing and angulation that allow a serviceable prosthesis, restorative space for the chosen material, and access positions that do not sabotage the screw channels. Send the plan early and we flag prosthetic conflicts while they are still cheap to fix.
Why do you write All-on-X instead of the name patients use?
Because the best-known name for the four-implant concept is a manufacturer's trademark, and we are an independent lab restoring every major system. All-on-X is the generic umbrella: an arch of teeth on a defined number of fixtures, whatever number your plan justifies. On your Rx, write whatever your practice uses, from a fixture count to simply full-arch; the fabrication is identical.
Full-Arch Work Since the Analog Era
Reliable Dental Studio has been family-owned since 1994 and has grown with implant prosthetics from single units to complete arches. Full-arch cases concentrate everything difficult about implant work: passive fit across four or more fixtures, materials under permanent load, esthetics that have to survive a laugh, and logistics with no slack. Our implant department runs all on x cases digitally since 2010, with verified models, controlled milling, and documentation that follows the prosthesis for its whole service life. The full-arch category rewards labs that have already made their mistakes on someone else, and after three decades ours are long behind us.
Depth matters more than breadth on this page, which is why the actual engineering lives on the product pages: staging on the full arch restoration page, bar construction on the hybrid page, retention mechanics with the overdentures. What unites them is the discipline underneath, one responsible technician per case, verification before every irreversible step, and honest advice when a plan asks more of a material than it can give.
That honesty extends to the all on x label itself. It is a planning shorthand, not a product name, and no single fixture count is right for every patient in every arch. What we promise is narrower and more useful: whether the Rx names four fixtures, six, or simply says full-arch, the prosthetic execution will be precise, serviceable, and documented. Where marketing packages promise simplicity, we would rather promise engineering.
From Concept to Case File
Starting a full-arch project with us is deliberately unbureaucratic. Send the diagnostic records, scans or impressions, photos, and the intended concept through the secure portal or by courier with prepaid labels we provide; practices near our locations can schedule pickups instead. The implant department reviews the restorative space and the component situation, and you get lab-side feedback on the all on x concept before the case commits to a path. That early conversation costs nothing and has saved more than one arch from a component conflict discovered too late.
From there, the all on x case follows the matching product workflow with its own specifications and staging, and nothing you decided at concept stage has to be re-explained to a new contact. Turnaround is 14 working days per stage, rush requests get realistic answers, and the case file keeps every component, torque value, and design decision retrievable for the years of service ahead. Practices from San Diego to Denver to the Round Rock area send full-arch work this way, and the distance has never been the hard part.
If a full-arch case is on your schedule this quarter, talk to us while it is still a concept, ideally before the surgical appointment is even booked. Open a lab account or send the plan directly: we respond within 24 hours, and the first conversation is with the technician who would own the case, not with a sales script.